OP
OP
Mustanglvr
Well-known member
- Joined
- Dec 4, 2004
- Messages
- 3,258
Thanks for all the info guys. Rhonda
COMMUNITY
1968 GT/CS & HCS
2007+ GT/CS
1966-1967 HCS
-
Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.If you have problems registering or can't log into your account, please contact Admin.Please Note: If you are an existing member and your password no longer works, click here to reset it.
Question about steering
- Thread starter Mustanglvr
- Start date
rvrtrash
Well-known member
- Joined
- Apr 25, 2003
- Messages
- 3,652
[quote author=68gt390 link=board=1;threadid=1658;start=15#msg10364 date=1115756880]
Don't want to step on any toe's here but, check your stats again. 16:1 ratio was used on all power steering cars, and 19:1 ratio was used on all manual steering cars.
Don
[/quote]
No toes stepped on here. I'm just quoting the book that Ford put out. I'll give the part numbers when I get home from work. 19:1 did show manual only but 16:1 had manual and power with the same number. I didn't get into the '65-66 or '67 only stuff because I didn't think it applied.
Steve
Don't want to step on any toe's here but, check your stats again. 16:1 ratio was used on all power steering cars, and 19:1 ratio was used on all manual steering cars.
Don
[/quote]
No toes stepped on here. I'm just quoting the book that Ford put out. I'll give the part numbers when I get home from work. 19:1 did show manual only but 16:1 had manual and power with the same number. I didn't get into the '65-66 or '67 only stuff because I didn't think it applied.
Steve
rvrtrash
Well-known member
- Joined
- Apr 25, 2003
- Messages
- 3,652
OK, for '67-'70 manual steering you had a 6-3/16" long input shaft, 1-1/8" diam. sector shaft with 19:1 ratio, part #C7ZZ-3504-A or all the same measurements with a 16:1 ratio, part #C7ZZ-3504-F. For power steering it used the 16:1 ratio, same part #. '65-'66 was set up the same way with M/S part #'s C5ZZ-3504-A (19:1) or C5ZZ-3504-C (16:1) and power steering using the C suffix part. '67 had a couple other boxes that don't fit anything else-who knows why. This is from my Ford Master Parts Catalog-May '75 edition. Hope this helps.
Steve
Steve
