You guys are going to get sick of me soon....
I'm blasting on the rotisserie and I just realized I can't seem to find my reference info on what gets painted Red Oxide and what gets painted black etc.
Pics soon...
OK well I found all the threads that talk about this and have read through... Here's my questions..(told you you'd get sick of me)
Can you critique my process/Give opinions as I explain here.. and possibly recommend alternatives or alternative products?!
1) Take everything down to bare metal.
2) Clean off residue from blasting material with _____? (vinegar for soda areas, what for alum oxide or sand areas?
3) Treat cleaned rusted areas with Eastwood rust converter products.
4) shoot primer on all other areas. Primer is ______? (an epoxy primer sealer red oxide
5) shoot seam sealer in all factory sealer locations
6) shoot a satin black SEM 39143 in pinch welds and other areas? (Alternatives to SEM? Eastwood chassis black?
7) Coat with sound deadener/ undercoating on wheel wells, and floor pan undersides - (necessary?)
I'm not going for perfect concourse here - but a best process to fight the northwest wet weather and longevity, while maintaining an original look.
Don't beat me up too bad, This is my first mustang project.
I'm blasting on the rotisserie and I just realized I can't seem to find my reference info on what gets painted Red Oxide and what gets painted black etc.
Pics soon...
OK well I found all the threads that talk about this and have read through... Here's my questions..(told you you'd get sick of me)
Can you critique my process/Give opinions as I explain here.. and possibly recommend alternatives or alternative products?!
1) Take everything down to bare metal.
2) Clean off residue from blasting material with _____? (vinegar for soda areas, what for alum oxide or sand areas?
3) Treat cleaned rusted areas with Eastwood rust converter products.
4) shoot primer on all other areas. Primer is ______? (an epoxy primer sealer red oxide
5) shoot seam sealer in all factory sealer locations
6) shoot a satin black SEM 39143 in pinch welds and other areas? (Alternatives to SEM? Eastwood chassis black?
7) Coat with sound deadener/ undercoating on wheel wells, and floor pan undersides - (necessary?)
I'm not going for perfect concourse here - but a best process to fight the northwest wet weather and longevity, while maintaining an original look.
Don't beat me up too bad, This is my first mustang project.
Last edited: