68 special
Well-known member
- Joined
- Jan 17, 2004
- Messages
- 524
I'm in the process of rebuilding a set of '67 kelsey Hayes disc brake calipers and there is a plate that covers the disc pads with a screw on each end.
My question is , are the 2 spring clips that are supposed to be attached to the inside of the plate really necessary or can the plate be attached without the clips. Not quite sure of the clips purpose. My manual shows some clips that attach in place of the plate.
Thanks Bret
My question is , are the 2 spring clips that are supposed to be attached to the inside of the plate really necessary or can the plate be attached without the clips. Not quite sure of the clips purpose. My manual shows some clips that attach in place of the plate.
Thanks Bret