1968 - Gas Cap leaking

[Sarge]

Folks,

I am seeing signs that the gas cap is leaking. The rear bumper chrome is looking like the gas has been escaping from the filler neck out the cap. The filler neck is new, and I don't see signs of problems inside the trunk. Is there a kit or parts to buy to rebuild the gas cap? New seal "lid" (not sure what it's called) spring, gasket or ?? And how do you rebuild the gas cap? Or is it "just buy a new one"?

Thanks,

Robert

[stangfan]

I didn't think those gas caps were leak-proof when they were new. I don't ever fill my tank to the top for that reason.

[Mosesatm]

Many years ago I made a new gasket for mine. Just purchased a sheet of gasket material and copied the rock hard one that was in the cap.

[Don]

If you decide to make your own gasket beware that the new gas blends (with ethanol) will not be compatible with some of the materials available.

[robert campbell]

Dudes,
I got tired of bending over and putting gas in a pop open gas cap that hates the angle of the new gas nozzles. Got tired of gas squirting out on the bumper and draining down the valance. Got tired of gas nozzles that only operate if I hug them and rub their bellies! My knees ached all the time! Don't ask about my back!

Mostly got tired! I made a gas filler that is inside the trunk and our pop open is a fake now. Gas filler is straight down into the tank. Went to a junk yard and grabbed an old gas fill out of any old made in the USA car! Welded it onto about a foot of exhaust pipe and voila!!

No one steals our gas and I can stand up and fill with my knees in a locked position like a homo sapien should be with his back straight up and down! No more spillage! No more leaking!! And can be put it back to stock in about 30 minutes if the sale of your prized steed hinges on the buyer having young knees and no brains!!

Want a picture?? Tired of spilling gas everywhere??

Rob

[Ruppstang]

Originally Posted by robert campbell

Dudes,
I got tired of bending over and putting gas in a pop open gas cap that hates the angle of the new gas nozzles. Got tired of gas squirting out on the bumper and draining down the valance. Got tired of gas nozzles that only operate if I hug them and rub their bellies! My knees ached all the time! Don't ask about my back!

Mostly got tired! I made a gas filler that is inside the trunk and our pop open is a fake now. Gas filler is straight down into the tank. Went to a junk yard and grabbed an old gas fill out of any old made in the USA car! Welded it onto about a foot of exhaust pipe and voila!!

No one steals our gas and I can stand up and fill with my knees in a locked position like a homo sapien should be with his back straight up and down! No more spillage! No more leaking!! And can be put it back to stock in about 30 minutes if the sale of your prized steed hinges on the buyer having young knees and no brains!!

Want a picture?? Tired of spilling gas everywhere??

Rob

Rob what is not modified on your car?? LOL

[sam]

yup..........I would like a picture of this ! I hear ya
Sam

[robert campbell]

Pic soon. Very easy to make. Marty, Val's Fastback has one also!!!

[BigJim]

Sounds like a potential gas spill in your trunk if the nozzle auto shut off fails to shut off in time.

[robert campbell]

Originally Posted by BigJim

Sounds like a potential gas spill in your trunk if the nozzle auto shut off fails to shut off in time.

Has not happened since 1977 in Val's Fastback, but of course I never leave the gas nozzle unattended. Keep the seal centered on the fill area and it shuts off fine. And I am standing upright. Blanked off the gas cap area, and all is reversible in just a few minutes.

Boy does my back thank me!!!

[franklinair]

I replaced the gas cap on mine. It has a concealed cap to seal the filler neck. Found it on E-Bay.

Neil

[Powell]

Good idea Neil, is the hidden cap vented??

[whodat]

I bought a repop flip open gas cap and that cap Neil talks about was in the box too.

[BroadwayBlue]

I've used this, or something similar at least for many years.

http://www.cjponyparts.com/fuel-fill...-1968/p/HW481/

[BroadwayBlue]

Resurrecting this thread.

That gasket isn't working anymore and tired of having a stream of gas on my driveway after filling up and maneuvering into the garage.
A little incline and it's pouring out when full. I saw a GTO pull out of the gas station once and the gas was coming out as he accelerated. I thought it was amusing at the time, I guess I'm probably doing the same thing now

So I'm throwing in the towel and planning on trying the repop gas cap.

I like Rob's solution but thinking of giving the repop a try.

Wasn't sure how the screw on cap worked. I get an idea from Neil's picture.

Has anyone installed the repop themselves? Is it a simple swap?
I'm trying to figure out where the cap screws on. Is it to the new gas cap structure itself?

Thanks in advance!

UPDATE: So this video helped. I guess I should go home and look at my filler next closer :)
If this is the same as ours the cap looks to fit on the existing filler neck.
If so, do I need to buy the whole kit or just get a gas cap that will fit inside? Understanding I might need to remove some of the pop open pieces.
http://www.cjponyparts.com/gas-cap-p...-1968/p/GC68P/

Sorry for so many questions. Will also look at my filler neck when I'm home.