Thread: [1968] 390 FI Heads?
View Single Post
Old 09/20/2017, 10:21 AM   #8
Mosesatm
 
Mosesatm's Avatar
 

Location: Spokane, Washington
Joined: Jan 05
Posts: 7,429

Here's where I got my information regarding FT vs. FE.
https://en.wikipedia.org/wiki/Ford_FE_engine

Quote:
"FE" derives from 'Ford-Edsel.'[1] Versions of the FE line designed for use in medium and heavy trucks and school buses from 1964 through 1978 were known as "FT," for 'Ford-Truck,'[2] and differed primarily by having steel (instead of nodular iron) crankshafts, larger crank snouts, different distributor shafts, different water pumps and a greater use of iron for its parts.


Quote:
FE/FT engine displacements

Displacement Type Bore+0.0036/-0.0000 Stroke+/-0.004
330 cu in (5.4 L) FT 3.8750 in (98.43 mm) 3.500 in (88.9 mm)
332 cu in (5.4 L) FE 4.0000 in (101.60 mm) 3.300 in (83.8 mm)
352 cu in (5.8 L) FE 4.0000 in (101.60 mm) 3.500 in (88.9 mm)
359 cu in (5.9 L) FT 4.0500 in (102.87 mm) 3.500 in (88.9 mm)
360 cu in (5.9 L) FE 4.0500 in (102.87 mm) 3.500 in (88.9 mm)
361 cu in (5.9 L) FE 4.0500 in (102.87 mm) 3.500 in (88.9 mm)
361 cu in (5.9 L) FT 4.0500 in (102.87 mm) 3.500 in (88.9 mm)
389 cu in (6.4 L) FT 4.0500 in (102.87 mm) 3.784 in (96.1 mm)
390 cu in (6.4 L) FE 4.0500 in (102.87 mm) 3.784 in (96.1 mm)
391 cu in (6.4 L) FT 4.0500 in (102.87 mm) 3.786 in (96.2 mm)

396 cu in (6.5 L) FE 4.2328 in (107.51 mm) 3.514 in (89.3 mm)
406 cu in (6.7 L) FE 4.1300 in (104.90 mm) 3.784 in (96.1 mm)
410 cu in (6.7 L) FE 4.0500 in (102.87 mm) 3.984 in (101.2 mm)
427 cu in (7.0 L) FE 4.2328 in (107.51 mm) 3.784 in (96.1 mm)
428 cu in (7.0 L) FE 4.1300 in (104.90 mm) 3.984 in (101.2 mm)
Here's another good site.
http://www.diyford.com/choose-ford-f...ylinder-heads/
Mosesatm is offline   Reply With Quote