after a very long time of searching i finally found some grey foam with an adhesive backing that i can use to replicate the 2 foam pads that are under the gt/cs decklid at the spoiler (page 97 of the 1996 registry book).
i am willing to share my find with all of you if you're interested. all i ask for is a self addressed STAMPED envelope from you. the foam comes as a 3" X 5" piece and you will have to cut it to size yourself. in a previous post, i had asked if anyone had the original size. i was given this: length- 4.5", width- 7/8", thickness-3/16". i used a very sharp razor blade to cut mine and they look great! right now i have about 12 extras, first come first serve. i will try and get more if i run out.
i will post a couple of picture links. the pic of the one that is installed on my gt/cs is very light due to the flash. it is actually a dark grey as you will se in the other pic. if you have any questions, e-mail me. Talan423@aol.com
tom
http://images.andale.com/f2/115/106/3874239/1066377561582_decklid_foam_001.jpg
http://images.andale.com/f2/115/106/3874239/1064118791205_decklid_foam_002.jpg
i am willing to share my find with all of you if you're interested. all i ask for is a self addressed STAMPED envelope from you. the foam comes as a 3" X 5" piece and you will have to cut it to size yourself. in a previous post, i had asked if anyone had the original size. i was given this: length- 4.5", width- 7/8", thickness-3/16". i used a very sharp razor blade to cut mine and they look great! right now i have about 12 extras, first come first serve. i will try and get more if i run out.
i will post a couple of picture links. the pic of the one that is installed on my gt/cs is very light due to the flash. it is actually a dark grey as you will se in the other pic. if you have any questions, e-mail me. Talan423@aol.com
tom
http://images.andale.com/f2/115/106/3874239/1066377561582_decklid_foam_001.jpg
http://images.andale.com/f2/115/106/3874239/1064118791205_decklid_foam_002.jpg