PFSlim
Well-known member
After completing our body work, we sprayed the car with a sandable primer called "All You Will Ever Need". It is a spray on primer that builds up. Once dry, we applied a guide coat of black spray paint on the primer and started sanding. We sanded the complete car back to metal, then repeated the process another 2 times (3 times total). The primer will fill all small divots, holes, etc to make the body very straight.
After completing this process, a final layer of regular primer was applied to the car. The car set outside in 100 degree temp for 1 week before we moved the car to the paint booth. This allowed for any shrinkage before base was applied.
Paul
After completing this process, a final layer of regular primer was applied to the car. The car set outside in 100 degree temp for 1 week before we moved the car to the paint booth. This allowed for any shrinkage before base was applied.
Paul