Recent content by copper

still trying to puzle where to sent money to Gary can some one help a not so computer car nut like me Copper

Gary I Would love one GT/CS to put on my windshield please let me know where to send my $5 I'm in Ontario Canada Copper E-Mail gdadads@rogers.com

Retroman99 Looks good and would look great on my windshield if becomes reality let me know copper

Neil Got a hose from Napa almost finished installing it a good fit but finding my hands too big for the tight spots hope this solves my problems let you know later Tony (Copper)

thanks Niel. Have you used them to see if thy have something close to original I'm beginning to find what i've done wrong and found brkts I didnot know were there tony (copper)

what are the nearest hoses to original and where can they be bought parts are limited in Ontario Canada I have spent too much so far on this project and seem to be getting deeper in the crap because the car I bought was botched up

I have been trying to find the correct way to run the power steering hoses and which cjpony parts are the correct replacements

Yellow plug does have power with key on Found 2 blown fuses seems to be only damage except the fried wire .Sortiing other problems out but the further I dig the more I find sorted shifter indicator light and have all interior lights on consul working. But the wire that fed the shift indicator...

What is the best referance book for wireing I have (MP4 Jim Osborn 1968 Mustang wireing diagram manual)but find it hard to follow Is there a better book on the market My C/S has factory AC and .Under the dash is a yellow female plug wiith 3 wires comming out the one going to ground (black with a...

Someone E=Mailed me as regaurds to my last post sorry I lost your e-mail address COPPER

Original Seat Blelt Bolts searching various sites came accros WestCoastClassicCougar they had all the differant seat belt bolts + all the washers and spacers to bring my instalation back to original copper:smile:

If some one can come up with the correct configeration PLASE let us know As I can see The rear bolts are hex have no shoulders no destnce pieces and bolt straight to body anchor The outside bolts hex with a 1/2in shoulder distance washer and a heavey washer over...

My C/S was built Feb 29th I've been trying to figure out what the front seat belt set up was I assumed it was 2 seperate belts on one bolt each side at front center.(The one I.m looking for) I know on later models the 2 belts were joined together with one anchor point. COPPER

Checked out both sites they only carry regular length shoulder bolts with 1/2 inch shoulders. This one has a shoulder length of 7/8th inches With a D stamped on the end for the centre front to carry 2 belts lap and shoulder. (Am I right in believing some gt/cs came with the 2 seperate belt set...

Wanted Front inside seat belt bolt that carries 2 belts lap and shoulder for 68 GT/CS gdadads@rogers.com